Fix bolt anchor stud is assembled four segments shield anchor only with stud bolt. The full threaded stud bolt ensure to adjust the thread height freely for fastening and make stud shield anchorwidely suitable for installing the various thickness of the fixtures and reach specific installation application purpose.

    A square nut inserted in FB shield anchor is pulling into shield anchor body when tightening the stud and make the shield anchor expand to generate balanced expansion force in four directions in the hole wall drilled in the base materials to ensure security of installation and usage.

   FB expansion anchor stud bolts are sutiable for medium-heavy installation loading purpose. The strong retaining force could be removed very easily after being installed. The four segment shields are made of carbon steel plate and produced by high speed automatic punching machine. Masonry fix bolt shield anchor bolts are widely used for anchoring and fixing the objects in various structure substrate.

Product Features:

☆ Pre-assembled with full thread stud bolt & Din 934 hex nut & Din 125/9021 flat washer.

☆ Adjust thread height freely to install various thickness of the fixtures.

☆ If being loose or fall scattered, could reassemble or replace a spring to be restored.

☆ Generate four directions balanced expansion force provide optimal loading and ensure security of installing.

☆ Being suitable for medium-heavy duty loading purpose and weak base materials.

Materials & Surface treatment: 

 ☞ Carton steel & Zinc plating and Zinc plated and yellow passivated.

Installation Substrate:  ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid wall ☑ Stone

Applications:

◆ Special door industry,Wall panel.

◆ Installation of signs, handrails, railings, shelves and gates.

◆ Installation of grating and fence and heavy machinery installing.

◆ Pipe installation engineering / pipe support.

◆ Cable and tower racks.

◆ Installation of starter bars for structural expansion and rectification works.

◆ Structural expansion and rectification works.

◆ Curtain walls, cladding and precast concrete components.

Installation Procedures:

❶ Drill a hole in the substrate to ensure the correct diameter and embedment depth.

❷ Use a nylon brush or high pressure air pump to clean all debris and dust inside the hole.

❸ Loosen and remove stud bolt, hex nut and flat washer.

❹ Insert fix bolt shield anchor only into the drilled hole until being flush with the surface.

❺ Pass stud bolt through a guide hole in the fixture and vertically aligned with and close to a substrate hole.

❻ To tighten stud bolt by tool until be fixed fully.

Product size description: (mm/inch)

** The special stud bot sizes are available.

** Being available to assemble loose bolt, stud, projecting bolt, eye bolt and hook bolt.