Chemical anchor stud is an expansion free fixings,composed chemical adhesive and metal all threaded stud,made of carbon steel or ss material with inner hex,outer hex or flat head types Adhesive anchor bolts are easily used in the downward or horizontal position and in the area of critical edge adopting expansion free fixing,not to weaken base materials.

    For steel chemical anchor installation, use special setting tools. Chemical adhesive mainly uses chemical glass capsule and injection resin.Having a high pull-out value because of the chemical bonding between adhesive anchor bolts and base material,instead of friction fixing.

    Concrete chemical anchor stud is also used for connecting and reinforcing of steel bars or threaded rods in the reinforced concrete construction structure.Under the good chemical adhesion bonding and load-bearing performance, being also applied to the continuous fixation and reinforce of old buildings to insert steel chemical anchor studs into the wall, partition wall or foundation building to stand static and dynamic loads. 

[Product features]:

★ Design external hex head, internal hex head and flat head types to use special setting tool for installing.

★ Made of carbon steel materials having 4.8-8.8 grade to realize various use purpose.

★ No expansion function.

★ Allow to use in the small space or edge of construction structure foundation.

★ The sharp tail end make it insert chemical glass capsule and installing hole easier and quicker.

★ Use chemical adhesive system for bonding between anchor stud and base materials in the hole to realize the fixing function, also called chemical adhesive anchors.

★ Mainly adopt chemical glass capsule or injection resin to achieve chemical bonding.

★ Also used in reinforcement concrete construction structure for connecting or reinforcing.

★ High loading performance and suitable for static and dynamic loading place.

★ Allow usage in damp installing hole.

[Chemical Glass Capsule Compositions]: Hardener + Resin + Glass + Quartz

[Materials & Surface treatment]:

☞ Carbon steel & ZYP / ZP /  HDG / Dacromet Spraying.

☞ Stainless steel 304 / 316.

[Base Materials]:  ☑ Concrete ☑ Masonry ☑ Brickwork ☑ Solid brick wall ☑ Stone

[Applications]:

☆ Tie back for temporary structures or permanent fixing.

☆ Chemical fixing for steel structure,curtain walling,cladding,precast concrete components.

☆ Telecom tower, Racking.

☆ Installing sign, handrails,balustrades and gates.

☆ Goods shelves installing .

☆ Installation of starter rods for structural extension and rectification works.

☆ Reconstruction and reinforcement of old and dangerous buildings works.

☆ Decorative panel fixing or architectural finishes.

☆ Reinforcement concrete construction structure for connecting or reinforcing engineering.

☆ High rise construction steel structure installing project.

☆ Power plants,tunnel construction engineering.

☆ Cranes,lifts and escalators installation.

☆ Roads,bridges,railroad construction works.

[Hardening-setting time]:

[Installation Steps]:

❶ Drill hole in base material to ensure the proper hole diameter and depth.

❷ Use brush to remove the dirt and dust in the hole.

❸ Check the viscosity of the resin inside of glass capsule and insert a chemical glass capsule into a clean hole.

❹ Remove hex nut & washer to rotate threaded stud with setting tool and power tool to drive it into glass capsule till reaching the bottom of the hole.

❺ Observe the specified curing time until being solidified completely.

❻ Tighten hex nut and washer for fixing or reinforcing.

[Product size description]: (mm/inch)

**The special style and size are available according to the samples or the drawings supplied by customers.